GlideRite - 2235-Z (5 Pair Pack) 22-inch 70 lb. Full Extension Ball Bearing Drawer Slides

GlideRite - 2235-Z (5 Pair Pack) 22-inch 70 lb. Full Extension Ball Bearing Drawer Slides Review

See more picture

GlideRite - 2235-Z (5 Pair Pack) 22-inch 70 lb. Full Extension Ball Bearing Drawer Slides Feature

• 5 sets of 70# GlideRite 35 Series full extension slides
• Side mounted, non handed design, positive stop
• Steel ball-bearing action slides that are remarkably smooth and quiet
• Lever disconnect for easy drawer removal
• Length: 22" (550mm) - Available in sizes 14 to 22-inches (350mm to 550mm)

5-pair Convenience Pack, 70 lb load rating, light duty slides. These slides are the same quality as our 70 series GlideRite slides except these slides are rated at a 70 lb load rating and have a narrower (35mm) width which makes them ideal for upgrading kitchens. Other ideal uses are in Office furniture, Cabinets, Closets, Kitchen Accessories, & Medical furniture. These zinc finished GlideRite slides are made of high-grade steel meets or exceeds all BIFMA, BHMA, and ANSI standards for quality and have a limited lifetime replacement warranty. Autual Size: length 550mm (21-5/8 inches), width 35mm (1 3/8 inches), thickness is 12.7mm (1/2 inch) Length fully open: 43-1/4-inches. 5-pair convenience pack includes slides, screws, and instructions. For Face Frame installation you will need rear mounting face frame brackets, just search: GlideRite SK35

Check price now

LIBERTY HARDWARE D68822C-W-TS 22-Inch Bottom Mount Drawer Slide

LIBERTY HARDWARE D68822C-W-TS 22-Inch Bottom Mount Drawer Slide Review

See more picture

LIBERTY HARDWARE D68822C-W-TS 22-Inch Bottom Mount Drawer Slide Feature

• European self-closing bottom mount
• 100-Pound load capacity
• Easy to follow instructions and mounting hardware included

22-Inch Bottom Mount Drawer Slide.

Check price now

Shop Fox D3031 18-Inch Full Ext Drawer Slide 100-Pound Capacity Side Mount, Pair

Shop Fox D3031 18-Inch Full Ext Drawer Slide 100-Pound Capacity Side Mount, Pair Review

See more picture

Shop Fox D3031 18-Inch Full Ext Drawer Slide 100-Pound Capacity Side Mount, Pair Feature

• 18-Inch drawer slide

When weight is a concern, use either the Shop Fox® 3/4 Extension or the Full Extension Ball Bearing Slides. 3/4 extension slides are 1 3/8" tall an the full extension slides are 1 3/4" tall.

Check price now

GlideRite 2075-Z - 20-inch 100 lb Hydraulic Soft/Self Close Full Extension Ball Bearing Drawer Slides

GlideRite 2075-Z - 20-inch 100 lb Hydraulic Soft/Self Close Full Extension Ball Bearing Drawer Slides Review

See more picture

GlideRite 2075-Z - 20-inch 100 lb Hydraulic Soft/Self Close Full Extension Ball Bearing Drawer Slides Feature

• One pair of 100# GlideRite 75 Series full extension "Soft Close" slides
• Hydraulic Soft/Self Close feature to slowly draw the drawer closed without slamming shut
• Side mounted design, positive stop, and common 32mm hole pattern
• Steel ball-bearing action and lever disconnect.
• Length: 20" (500mm) - Available in sizes: 14" to 24" (350mm to 600mm)

One pair 100# load rating, full extension"Soft Close Self Close medium duty slides. These slides have a hydraulic "Soft Close" feature to slowly draw the drawer closed without slamming shut. Slide features include: Steel ball-bearing action, lever disconnect, positive stop, 32mm hole pattern and full extension with. Ideal use is in Office furniture, Cabinets, Closets, Kitchen Accessories, & Medical furniture. These zinc finished GlideRite slides are made of high-grade steel meets or exceeds all BIFMA, BHMA, and ANSI standards for quality and have a lifetime replacement limited warranty. Size: length 500mm (20 inches), width 45.5mm (1 3/4 inches), thickness is 12.7mm (1/2 inch) Actual cabinet member measurement: 19-11/16 inches, length open 39-3/8 inches. For Face Frame installation you will need rear mounting face frame brackets, Just search: GlideRite SK70. Includes mounting screws and instructions.

Check price now

Undermount Drawer Slide - 22" - Cut To Size L-D69042C-UC-CU

Undermount Drawer Slide - 22" - Cut To Size L-D69042C-UC-CU Review

See more picture

This is a single track Liberty slide with triple nylon rollers. Cut to size needed. Zinc plated steel offers many years of service. Easy installation. Make drawer 1/4" (.64mm) narrower than cabinet opening. Height of drawer sides should be 3/8" (.95mm) less than cabinet opening. Mounts in center underneath drawer. Drawer roller attaches to rear of drawer box and travels metal track. Two front rollers are mounted on each side inside the face frame to support both sides of drawer as it glides in and out. This is an old standard in hidden slides. 1.2mm steel construction makes this slide a good choice for both new construction and remodeling. These slides are consumer packaged with everything required for mounting including instructions. Features: Cut to size length. Maximum length 22”. No ugly slides showing when drawer is open. 75 lb capacity overall length 22-5/8"

Check price now

Kreg NZ03 Magnetic Drawer Slide Mounting Tool

Kreg NZ03 Magnetic Drawer Slide Mounting Tool Review

See more picture

Kreg NZ03 Magnetic Drawer Slide Mounting Tool Feature

• Simplifies slide positioning for cabinet drawers
• Tool uses reference points to position slides parallel to drawer openings
• Works with most kinds of metallic slides
• Produces a perfect alignment at each use
• Allows an easier process of positioning accurate slides

The Kreg Magnetic Drawer Slide Mounting Tool simplifies the work of positioning your metallic slides to ensure smooth gliding drawer movement in cabinets. It uses the intersection of the cabinet stile and rail in face frame cabinets, and the cabinet side in frameless cabinets, as a reference point for positioning a slide perfectly parallel to the drawer opening. Simply place a metallic drawer slide into position on the base of the tool, which uses magnets to hold the slide in place, align the tool where the stile and rail meet, and drive the screws for a perfect alignment every time.

Check price now

Blum Rear Mount Bracket, sold each. Order two for each pair of Tandem slides

Blum Rear Mount Bracket, sold each. Order two for each pair of Tandem slides Review

See more picture

Blum Rear Mount Bracket, sold each. Order two for each pair of Tandem slides Feature

• Rear Mounting Bkt For 552H & 562H

Rear mounting bracket for 552H and 562H Non-handed

Check price now

Classic Wood Center Mount Drawer Slide

Classic Wood Center Mount Drawer Slide Review

See more picture

Classic Wood Center Mount Drawer Slide Feature

• High-tech kiln drying method eliminates warpage.
• 22" long.

Durable classic wood center mount drawer slide is a long-lasting performer and will provide years of service. A high-tech kiln drying method eliminates warpage. Slide comes undrilled, allowing customization. 22" long.

Check price now

Shop Fox D3033 24-Inch Full Ext Drawer Slide 100-Pound Capacity Side Mount, Pair

Shop Fox D3033 24-Inch Full Ext Drawer Slide 100-Pound Capacity Side Mount, Pair Review

See more picture

Shop Fox D3033 24-Inch Full Ext Drawer Slide 100-Pound Capacity Side Mount, Pair Feature

• 24-Inch drawer slide

When weight is a concern, use either the Shop Fox® 3/4 Extension or the Full Extension Ball Bearing Slides. 3/4 extension slides are 1 3/8" tall an the full extension slides are 1 3/4" tall.

Check price now